l need to know cuz l think it is on factory setting cuz l can get in with it cuz the codes are the same with means every who knows it knows how to pop my trunk and unlock my doors and l need to know how to reset it fast

The DDM (Driver is Door Module) controls the keyless entry on ur particular vehicle. It also has the five digit keypad code permanently programmed from the factory. Although an alternate code can be programmed, but it WILL NOT de-program the original code. The ONLY way to achieve what u r intending, is to REPLACE the DDM. This part is located on the driver door, accessed by removing the door trim panel. Given the age of the car, the part may be obsolete from Ford, so u may need to search around some salvage yards for a used one, matching ur year & vehicle description. Hope this helps.

Ford Girl has the right answer. The original code will always work, unless the module is changed.

Orginal code stays in, you can add a code if you know the orginal code

And l will 4th what all the rest have said.. Drivers door module code is permanent and requires replacement to change the code.

yes u have to replace the module,,but if u have a friend
that knows how to read diagram,you could switch the wire on the key pad harness or the module harness to change the code.. sample ;;find the wire that is connected to 1/2 then find the wire that is connected to 5/6 pull it out of the connector & exchange the wire ,the module will will still receive the same code but u r pressing a different no ex;;so if ur old code is 29752,,,your new code will be
69725

Open your trunk . Look at the hinges . One of them will have the default code printed on it . It is a 5 digit code . Push the code in and then push 1 . Then enter any code that you chose . It must be 5 numbers . This will be your new code .

That is it , l hope l helped you out .